Of all the ideas for fun science fair projects, this is my favorite for students who want to learn more about modern communication techniques and technologies. Through this experiment, students will build their own radios that actually work and can be tuned. This is also one of the scientists fun fair project ideas for students who are interested in technology and engineering, and communications.

Like all ideas science fair project, this project requires some items to collect in advance, but the cost is still less than $ 50. In addition, students need be careful that they are safe when working with any type of electricity.

Objective:

Through this experiment, students build a radio receiver of the ground-up. Also tune the radio to improve performance.

Introduction:
The radios are an integral part of our culture. They help us communicate over the same house or in an entire world. Using this crystal radio, students understand the basics behind the construction of a functional radio system.

Terms and concepts you need to know:
This experiment is based on a set of terms and concepts that students learn before or during the experiment, including the following:

• Radio frequency and radio wave
• FM Radio frequency (amplitude modulation)
• Resonance
• Detector
• Diode
• Power and electricity
• Antenna
• Tuner

Materials needed:
To complete this project, will A variety of materials that can take a while to collect, including:

• 1 round oatmeal box
• 1 board mounting wood
• 1 roll of plastic insulated wire (100 feet)
• 1 diode germanium
• 1 47 kOhm resistance
• 1 clamp
• 1 headphone ceramic
• 4 clips Fahnestock (optional)
• 1 multimeter

Procedure:
With the order to perform this procedure, you may want to have a father present. As with many ideas science fair project, safety should come first.

1. Thread wire through 2 small holes you poke about 1 / 2 inch in the oatmeal box. The cable must go outside the box. Using a foot of wire on the outside of the box which is used as a connection to the circuit. Take the wire that is within the box that does not slip.
2. Wrap the wire around the box 5 times. Remove some of the plastic insulation to twist the wires together.
3. Make envelops every 5 laps to get to 40 laps total.
4. Once you get to 40 turns, put another 2 holes in the box. Cut another foot on the wire in order to make extra cable outside the box. Push the wire through the hole to come out outside the box. Take the wire inside the box.
5. Use an antenna and ground. This can be any wire that is not isolated. Place the antenna as high as possible, but not near power lines.
6. Land of the antenna to a water pipe or metal bar that is at least 2 feet below ground.
7. Hook the wire to a clamp and a center tap. Hook the new wire to the headset. Listen until you hear a noise. You may have to modify the radio to hear a noise, if not hear at first.

This is one of the great ideas of science fair projects, but it may take time to build and perfect. Always put safety and work with parents to ensure they are completely safe. Finally – have fun!

If you are ready to move forward with its own radio project in science, your next step is to download a free copy of "Easy Steps to Award-Winning Science Fair Projects" on the link below now.

For a step-by-step guide to easily creating a really awesome science project, download a FREE copy of Easy Steps to Award-Winning Science Fair Projects right now.

If you want the super-easy way to creating a winning science fair project, check out the complete “Science Fair Project in a Box” kits from AwesomeScienceProjects.com.

picoDetector : a PIC12 metal detector

Treasure Hunter Metal Detector $89.95 Treasure Hunter Metal Detector

Pioneer EX Metal Detector $120.81 Bounty Hunter Pioneer EX Metal Detector

HEADW Metal Detector Headphones $34.99 Bounty Hunter HEADW Metal Detector Headphones are small and lightweight and are designed for use with bounty hunter metal detectors.

Snap Circuits Mini Kit: Motion Detector $24.48 Build your own motion detector, and whenever somebody walks in front of it, the sound of a laser comes out of the speaker and a red light flashes! 6 additional circuit projects can be done with this kit as well; a Siren Motion Detector, an Alarm Motion Detector, a Police Car Siren Sound, Fire Engine Siren Sound, Machine Gun Sound and a European Siren. The colorful, step-by-step instructions make these electronic experiments simple to build and use.

Bounty Hunter Metal Detector Binaural Headphone HEADW $37.02 Bounty Hunter Metal Detector Binaural Headphone HEADW

Bounty Hunter Metal Detector Carrying Bag CBAGW $30.8 Bounty Hunter Metal Detector Carrying Bag CBAGW

Pioneer-202 Metal Detector $205.94 Pioneer-202 Metal Detector Pioneer 202 Metal DetectorAdvanced treasure huntingTouch pad control4 Modes of operationFully automatic Ground-Trac® ground balancing3-Tone target identificationProgressive iron discrimination

VLF 2.1 Metal Detector $60.94 VLF 2.1 Metal Detector Bounty Hunter VLF 2.1 VLF 2.1The Metal Detector with Discrimination and Sensitivity Control is a low cost metal detector that will get you up and running for hidden treasure in no time. The VLF 2-1 Metal Detector by Bounty Hunter is lightweight with an ergonomic design for easy handling and comfortable use. The Bounty Hunters Metal Detector will detect coin size objects up to 5″ deep and larger coins at up to 3 inches. This Bounty Hunter Metal Detector also has discrimination control that will eliminate iron and most unwanted objects and sensitivity control for maximizing depth detection. Bounty Hunter The Metal Detectors VLF 21 operates on 2 9V alkaline batteries.FeaturesDiscrimination control will eliminate iron and most unwanted itemsMaximize depth detection with sensitivity controlDetects coin-size objects up to 5″ deep and larger objects up to 3″Volume proportional to signal strength2 search modesVariable levels of discriminationPreset ground balanceLightweight, ergonomic design for easy handling & comfortable use6 inch weather resistant coilOperates on 2 9-volt alkaline batteries

Tracker IV Metal Detector $104.99 he stylish Gold Digger Metal detector will detect all kinds of metal from iron relics, coins and household items to precious metals like silver and gold.coins. Streamlined in appearance, with only two operating controls and a mode selection switch, the Tr

Junior Metal Detector $52.94 Junior Metal Detector Professional metal detecting features for a junior size detectoristExtends to 2 1/4′Discrimination control will eliminate iron and most unwanted itemsSpeaker sound increases as target gets closerLightweight, ergonomic design for easy handling and comfortable use

Pioneer Prospector Metal Detector $74.94 Pioneer Prospector Metal Detector Pioneer Prospector Metal DetectorBHPRODescription:Discover lost treasures with the Bounty Hunter Pioneer Prospector Metal Detector. Treasure hunting is the hobby for everyone; it’s fun, easy and – best of all – rewarding. This Bounty Hunter Metal Detector is easy to use; you’ll be finding coins, rings and valuable relics in no time.FeaturesThe Pioneer Prospector comes with FREE Carry BagDiscrimination control will eliminate iron and most unwanted itemsMaximum depth detection with sensitivity controlDetects coin-size objects up to 5″ deep; larger objects up to 3′Volume proportional to signal strength2 search ModesVariable Levels of DiscriminationPreset Ground BalanceLightweight, ergonomic design for easy handling & comfortable use6 inch weather resistant search coil

Discovery 2200 Metal Detector $184.99 Packed full of features, this lightweight, well-constructed and deep-seeking metal detector from Bounty Hunter features intuitive controls for easy use. Crafted in the USA, this model features a jumbo LCD display with digital target identification and dep

Discovery 3300 Metal Detector $239 Packed with features for technical searches yet simple enough to enjoy if it’s your first time out, the Discovery 3300 metal detector is great for both beginners and pros. Custom programming with both automatic and ground-balance let the coil find exactly

Gold Digger Metal Detector $71.94 Gold Digger Metal Detector The stylish Gold Digger ® Metal detector will detect all kinds of metal from iron relics, coins and household items to precious metals like silver and gold.For more privacy when treasure seeking, the Gold Digger comes complete with headphones and 1/8 headphone jack for immediate use. Automatic tuning and ground balancePower and sensitivity controlTrash eliminator control to remove most undesirable items from detectionEarphone included with 1/8 headphone jackKey Features:Motion all-metal mode for detecting all types of metalRequires 2 9-volt Alkaline batteries (not included)6″ Coin Depth Detection2′ Large Object DetectionAnalog Intensity MeterPresent Ground BalanceProgressive DiscriminationTwo-Tone Audio7″ Closed Waterproof Coil

---